SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 138
Confidential
3.4.5.9 CR UNIT
1. Perform the Ink eject.
2. Remove the PRINTER COVER. (p72)
3. Remove the RIGHT HOUSING PLATE. (p74)
4. Remove the RIGHT COVER ASSY. (p88)
5. Remove the LEFT HOUSING PLATE. (p73)
6. Remove the LEFT COVER ASSY. (p86)
7. Unlock the CR UNIT. (p69)
8. Remove the CR SCALE. (p123)
9. Remove the CR MOTOR ASSY. (p125)
10. Remove the CR COVER. (p103)
11. Remove the DAMPER KIT. (p104)
12. Remove the PRINT HEAD. (p109)
13. Remove the three screws, and remove the APG Frame.
A) Silver M3x6 S-tite screw: 3 pcs
Figure 3-104. Removing the APG Frame
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to “4.1.2 Adjustment
Items and the Order by Repaired Part” (p194) and make sure to
perform the specified operations including required adjustment.
Pay attention to the positioning points (See Figure 3-104).
A
APG Frame
A
A
Positioning point
Positioning point
To Next Page
Loading...
Need help?
General