Epson Stylus Pro GS6000 - Page 102

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 102
Confidential
When installing the COOLING FAN (24V), make sure to set the
fan with the label upward as shown in the figure above.
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Fan Test