Epson Stylus Pro GS6000 - Page 111

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 111
Confidential
4. Remove the four screws that secure the MAIN BOARD ASSY from outside.
A) 1/4-40x1/4,H.H.,F/NI,O SCREW: two pieces
B) Silver, Phillips, Bind machine screw M3x6: one piece
C) Silver, Phillips, Pan with S.W & P.W M3x6: one piece
Figure 4-61. Removing the screws of MAIN BOARD ASSY (outside)
5. Remove the 11 screws that secure the MAIN BOARD ASSY, and remove the
MAIN BOARD ASSY.
A) Silver, Phillips, Cup M3x6: nine pieces
B) Stud bolt: two pieces
Figure 4-62. Removing the screws of MAIN BOARD ASSY (inside)
Figure 4-63. Connector Layout of the MAIN BOARD ASSY
Connector assignment:
B
A
C
Outside the Box
Elec Box
LANUSB
Inside the Box
MAIN BOARD ASSY
B
A
Connector No. Color Destination
CN1
White P/S TERM BOARD ASSY (J2)
CN2*
Black Unused
CN3*
Black Unused
CN5
--- USB
CN8*
Black Unused
CN11
White CR MOTOR
CN12
White PF MOTOR
CN13*
Black Unused
CN14*
Red Unused
CN15*
Yellow Unused
CN16*
Blue Unused
CN17*
White Unused
CN18*
Black Unused
CN19*
Red Unused
CN34
CN29
CN28
CN41*
CN39*
CN38* CN1
CN20
CN21
CN35
CN40*
CN31
CN30
CN11
CN48
CN8*
CN508*
CN22
CN17*
CN13*
CN12
CN16*
CN15*
CN14*
CN19*
CN18*
CN65
CN64 CN23 CN24
CN25
CN26
CN509
CN507
CN66*
CN506
CN3*
CN2*
CN5
CN501
*: Unused