Epson Stylus Pro GS6000 - Page 117

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 117
Confidential
4.4.6.7 P/S BOARD ASSY
1. Remove the MAINTENANCE COVER ASSY (both). (p91)
2. Remove the MAINTE COVER, B (both). (p92)
3. Remove the PAPER GUIDE COVER (both). (p94)
4. Remove the After Heater Cover. (p97)
5. Disconnect the two connectors.
6. Remove the four screws and remove the P/S BOARD ASSY with its fixing plate.
A) Silver, Phillips, Cup M3x6: four pieces
Figure 4-71. Detaching the P/S BOARD ASSY
7. Remove the nine screws and remove the fixing plate.
A) Silver, Phillips, Cup M3x6: nine pieces
Figure 4-72. Removing the Fixing plate
Connector assignment:
P/S BOARD ASSY
A
Inside the After Heater Cover
CN301
CN001
Fixing plate
Connector No. Color Destination
CN001
White TERMINAL BLOCK
CN301
White P/S TERM BOARD ASSY (J1)
A
P/S BOARD ASSY
Fixing plate