Epson Stylus Pro GS6000 - Page 135

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 135
Confidential
 M COVER SENSOR (L)
A) Silver, Phillips, Pan with S.W & P.W M2x12: two pieces
Figure 4-102. Removing the M COVER SENSOR (L)
 M COVER SENSOR (R)
A) Silver, Phillips, Pan with S.W & P.W M2x12: two pieces
Figure 4-103. Removing the M COVER SENSOR (R)
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Sensor Test
AA
M COVER SENSOR (L)
As seen from the front left
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Sensor Test
AA
M COVER SENSOR (R)
As seen from the front right