Epson Stylus Pro GS6000 - Page 149

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 149
Confidential
8. Remove the screw and remove the Inner Side Plate.
A) Silver, Phillips, Cup M3x6: one piece
Figure 4-117. Removing the Inner Side Plate (front)
9. Remove the two screws from the holes on the right side.
A) Silver, Phillips, Cup M3x6: two pieces
Figure 4-118. Removing the screws (right side)
A
As seen from the front
Inner Side Plate
PRESSURE LEVER
A
As seen from the right
CR MOTOR