Epson Stylus Pro GS6000 - Page 154

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 154
Confidential
4. Attach the Plate R by sliding it to the left while supporting the
LOWER BEARING at the bottom.
5. Attach the Plate R with the screw.
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment items>
1. CR Durability Test
LOWER BEARING
Plate R
A