Epson Stylus Pro GS6000 - Page 169

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 169
Confidential
8. Remove the three screws (each) from the bottom, and remove the PUMP ASSY.
A) Silver, Phillips, Pan with S.W & P.W M4x6: four pieces
Figure 4-146. Removing the PUMP ASSY
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Pump Counter Reset
A
PUMP ASSYs
Fixing plate