Epson Stylus Pro GS6000 - Page 171

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 171
Confidential
The tube connectors include “O-RINGs” (black rubber rings). To
prevent any leak, those O-RINGs have to be replaced with new
ones if the connectors are once opened.
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p184) and perform
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Solenoid Test
O-RINGs