Epson Stylus Pro GS6000 - Page 187

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Overview 187
Confidential
Electric
Components
& Boards
BATTERY
1
HEATER CONT BOARD ASSY
1
MAIN BOARD ASSY (Backup OK)
1 3 2
MAIN BOARD ASSY (Backup NG)
14 8 10 11 6 12 13 9 1 5 15 2 4 7 3
ALARM LED
1
Sensors &
Encoders
PF ENCODER ASSY
1
CR HP SENSOR
1
CR ENC ASSY
1
PG HIGHT SENSOR
1
SUB TANK SENSOR
1
F COVER SENSOR R
1
F COVER SENSOR L
1
M COVER SENSOR R
1
M COVER SENSOR L
1
IC COVER SENSOR R
1
IC COVER SENSOR L
1
LEVER SENSOR
1
Class Parts
Tests (P. 236) Adjustments
Sensor Test
Panel Test
Fan Test
Alarm LED Test
Encoder Test
Heater Test
Solenoid Test
NVRAM Backup (P. 198) NVRAM Restore (P. 198)
CR Related
Adjustments
Head Related Adjustments
PF Related
Adjustments
Other Adjustments
CR Belt Tension Adj. (P. 199)
CR Reduction Belt Tension Adj. (P. 201)
CR Height Adj. (P. 204)
Media Side Margin Adj. (P. 206)
CR Motor Counter Reset (P. 233)
Head Rank ID Input (P. 207)
Nozzle Check Pattern (P. 208)
Cleaning and Washing (P. 209)
Initial Ink Flag (P. 211)
Head Slant and Alignment Adj. (P. 212)
Head Nozzles Alignment Adj. (P. 218)
Head Uni-D/Bi-D Low Gap Adj. (P. 219)
Head Counter Reset (P. 233)
PF Reduction Belt Tension Adj. (P. 222)
Paper Feed Adj. (P. 223)
PF Counter Reset (P. 233)
RTC and USB ID (P. 224)
F/W Update (P. 225)
Pump Counter Reset (P. 233)
Washing Sequence Flag (P. 227)
IP Add. Setup & Network Test (P. 228)
NVRAM CLEAR OK (P. 229)
Rear Sensor Test/Rear AD Adj. (P. 230)
Input Serial Number (P. 231)
CR Origin Adj. (P. 232)