Epson Stylus Pro GS6000 - Page 188

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Overview 188
Confidential
Heaters PRE HEATERS (64)
1
PLATEN HEATER (64)
1
AFTER HEATER (64)
1
THERMISTOR, PRE
1
THERMISTOR, PLATEN
1
THERMISTOR, AFTER
1
Carriage
Mechanism
CR BELT
1 2 3
CR ENC SCALE
1
CR CURSOR ASSY
8 1 7 2 3 4 5 6
CR LOCK SOLENOID ASSY
1
CR REDUCTION BELT
1 2 3
CR MOTOR
1 2 5 3 4
Paper Feed
Mechanism
PF ENC SCALE
1
PF MOTOR
1 3 2
PF REDUCTION BELT
2 1 3
Ink System
Mechanism
PRINT HEAD
2 4 5 1 6 7 8 3
PUMP ASSY
1
SUB TANK ASSY
1
TWO-WAY VALVE ASSY
1
Class Parts
Tests (P. 236) Adjustments
Sensor Test
Panel Test
Fan Test
Alarm LED Test
Encoder Test
Heater Test
Solenoid Test
NVRAM Backup (P. 198) NVRAM Restore (P. 198)
CR Related
Adjustments
Head Related Adjustments
PF Related
Adjustments
Other Adjustments
CR Belt Tension Adj. (P. 199)
CR Reduction Belt Tension Adj. (P. 201)
CR Height Adj. (P. 204)
Media Side Margin Adj. (P. 206)
CR Motor Counter Reset (P. 233)
Head Rank ID Input (P. 207)
Nozzle Check Pattern (P. 208)
Cleaning and Washing (P. 209)
Initial Ink Flag (P. 211)
Head Slant and Alignment Adj. (P. 212)
Head Nozzles Alignment Adj. (P. 218)
Head Uni-D/Bi-D Low Gap Adj. (P. 219)
Head Counter Reset (P. 233)
PF Reduction Belt Tension Adj. (P. 222)
Paper Feed Adj. (P. 223)
PF Counter Reset (P. 233)
RTC and USB ID (P. 224)
F/W Update (P. 225)
Pump Counter Reset (P. 233)
Washing Sequence Flag (P. 227)
IP Add. Setup & Network Test (P. 228)
NVRAM CLEAR OK (P. 229)
Rear Sensor Test/Rear AD Adj. (P. 230)
Input Serial Number (P. 231)
CR Origin Adj. (P. 232)