EPSON Stylus Pro GS6000 Revision F
PRODUCT DESCRIPTION Control Panel 26
Confidential
MAINTENANCE
CLEANING (VERY LIGHT) EXECUTE You can perform very light cleaning. It discharges a smaller amount of ink compared to CLEANING (LIGHT).
CLEANING (LIGHT) EXECUTE You can perform normal cleaning. Select this mode normally.
CLEANING (MEDIUM) EXECUTE
You can perform strong cleaning. It discharges a larger amount of ink compared to CLEANING (LIGHT). Use
this mode when the print head clog situation does not improve by CLEANING (LIGHT).
CLEANING (HEAVY) EXECUTE
You can perform stronger cleaning. It discharges a larger amount of ink compared to CLEANING (MEDIUM).
Use this mode when the print head clog situation does not improve by CLEANING (MEDIUM).
HEAD WASHING EXECUTE
You can perform the head washing.
Cleaning cartridge (option) is needed to perform head washing.
MAINTENANCE
CARRIAGE MAINTENANCE EXECUTE The carriage will move into a position allowing you to clean the cleaning wiper and around the print head.
CLOCK SETTING MM/DD/YY HH:MM You can set year, month, date, hour, and minute.
CONTRAST ADJUSTMENT -20 - 0 - +20 You can adjust the contrast of the LCD panel.
TEST PRINT
NOZZLE CHECK PRINT
You can print a print head nozzle check pattern for each ink cartridge. It also prints the firmware version and the
ink usage.
STATUS SHEET PRINT You can print the current printer status.
NETWORK STATUS SHEET PRINT You can print the current network status.
JOB INFORMATION PRINT You can print the job information saved in the printer (up to 10 jobs).
CUSTOM PAPER PRINT You can print custom paper information registered in the Paper Setup menu.
Menu Item
Parameter
(*: Default setting)
Explanation
To Next Page
Loading...
