Epson Stylus Pro GS6000 - Setting and Aligning Roll Paper

Epson Stylus Pro GS6000 Revision F
PRODUCT DESCRIPTION Control Panel 35
Confidential
Test
Actuator CrLock Sol. Checks the CR Lock Solenoid.
Ctrl.Test
Ctrl.Ver
CtrlVer.AP
Displays the heater control board version.
CtrlVer.PCB
Ctrl.Sns
CtrlSns.Tank
1
Display the status of the sub tank sensors.
2
3
4
5
6
7
8
CtrlSns.Etc
Mainte Cover Displays the open/close status of the maintenance cover.
Ink Cover Displays the open/close status of the ink cover.
Front Cover Displays the open/close status of the ink cover.
Pre. Heater
Displays the temperature sensed for each heater position.Platen. Heater
After. Heater
Ctrl.Fan
Mist Fan
Mist Fan All
Checks the mist (cooling) fans operation.
Mist Fan 1
Mist Fan 2
Mist Fan 3
Box Fan Checks the box fan (cooling fan PE) operation.
Ctrl.Heater
Pre.Heater
Pre. Heater 1
Check if the heaters are warming correctly.
Pre. Heater 2
Platen.Heater
Pre. Heater 1
Pre. Heater 2
After.Heater
Pre. Heater 1
Pre. Heater 2
Table 1-1. Menu List
Menu Explanation