Epson TM-T90 - Page 220

Confidential
17
SHEET
App. 17
NO.
SHEET
REVISION
F
TITLE
NEXT
App. 18
TM-T90
Specification
(STANDARD)
Command TM-T90 original
TM-T88II-compatible
mode
(Msw 8-7 On)
TM-T88II
ESC W
[Default] vertical length:
ANK/Multilingual model: approx.
117.3 mm {4.62"}
Japanese model: approx. 92.3 mm
{3.63"}
[Maximum value] vertical length:
ANK/Multilingual model: approx.
234.5 mm {9.23"}
Japanese model: approx. 184.5 mm
{7.26"}
Vertical length will be 117.3 mm
{4.62"} when 2-color paper is
selected by customized value (a =
116)
<When paper width is 58 mm
{2.28"}>
[Default] horizontal length: approx.
50.8 mm {2"}
<When paper width is 60 mm
{2.36"}>
[Default] horizontal length: approx.
54.2 mm {2.13"}
←
[Default] vertical length:
approx. 117.3 mm {4.62"}
[Maximum value] vertical
length: approx. 117.3 mm
{4.62"}
<When paper width is 58 mm
{2.28"}>
[Default] horizontal length:
approx. 50.8 mm {2"}
ESC c 0
Ignored (executing not reading “n”)
→
Disabled (not executing “no
read” of n)
ESC c 1
Ignored (not reading “n”)
→
Disabled (not executing “no
read” of n)
ESC c 3
[Default] n = 0
→
[Default] n = 15
ESC c 6
Ignored (executing not reading “n”)
←
Ignored (executing not
reading “n”)
ESC t
16 to 18 are added to available range
for “n”
Range: 0 ≤ n ≤ 5, 16 ≤ n ≤ 19,
n = 255
←
Range: 0 ≤ n ≤ 5, n = 19 (*1),
20 ≤ n ≤ 26 (*2), n = 255
(*1) Applies only to ROMs ver.
3.14 or later
(*2) Supported only for Thai
characters
FS q
Defined range: 0 to 384KB selectable
NV bit-image memory is specified by
GS ( E command (default: 384KB)
Maximum defined area: 3M bits
(384KB)
←
All defined area: 2M bits
(256KB) fixed
GS ( D
Newly added.
←
GS ( E
Newly added.
←