5-18
Sub-assembly I
Assembly
Step
Assembly ProcedurePart Name
4
5
6
Carriage motor
CBS-tite (M3 x 4) x 1
Plate-Carriage sensor
CCS-tite (M3 x 6) x 1
Carriage sensor sub-assembly
CB (M3 x 4) x 1
• Turn over the Print frame sub-assembly and insert the carriage
motor gear in hole G; then secure the motor with the screw.
• Attach the Plate-Carriage sensor to the Carriage motor so that the
tabs engage portion H.
• Align hole I with the dowel and secure the Carriage sensor sub-
assembly to the Plate-Carriage sensor with the screw.
CONFIDENTIAL
To Next Page
Loading...
