EasyManua.ls Logo

evertz MultiFrame 7814 Series - Page 109

evertz MultiFrame 7814 Series
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Revision 1.1.3 Page - 95
7.19.1.5. Down Mix Type Control
This control enables the user to set the type of audio down mixing that will be performed. The user may
select from LoRo (Left Only and Right Only), LtRt (Left Total and Right Total) Prologic I and LtRt (Left
Total and Right Total) Prologic II OR may choose to perform a Custom down-mix.
LoRo
When set to LoRo, the down-mixer will generate Left Only and Right Only
(LoRo) stereo audio.
LtRt (Prologic I)
When set to LtRt (Prologic I), the down-mixer will generate Left Total and
Right Total (LtRt) Prologic I compatible stereo audio.
LtRt (Prologic II)
When set to LtRt (Prologic II), the down-mixer will generate Left Total and
Right Total (LtRt) Prologic II compatible stereo audio.
Custom
When set to custom, the down-mixer will generate Left and Right channels of
audio using the custom down-mixing equations.
7.19.1.6. Custom Down Mix Type Control Settings
When the Down Mix Type is set to Custom the following equation will be used to generate the down-
mixed audio.
norm
gainLFElfe
RsRsLs
LsC
CLLRL
gainlevLlevL
levlev
÷×
×+°
°
×+°
°×+
×+×
= )}
90/
0{
}90/0
{(
normgainLFE
lfeRsRs
LsLsC
CRLRR gain
levRlevRlev
lev ÷××+
°°×
+°°×
+×+
×= )
}90/0
{}90
/0{(
Where
gainlfe
is controlled by LFE Mixing and LFE Gain,
gain
is controlled by Output Gain and
norm
is
controlled by Output Scaling Mode and where
levLR
,
levC
,
levL
Ls
,
levL
Rs
,
levRLs
and
levRRs
are custom
specified user coefficients. These custom down-mixing coefficients are controlled using the appropriate
slider bars in the Down Mix Type control section as shown below.
levLR
: Ranges from 1.000 to 1.000 in increments of .001 increments.
lev
C
: Ranges from 1.000 to 1.000 in increments of .001 increments.
levL
Ls
: Ranges from 1.000 to 1.000 in increments of .001 increments.
levL
Rs
: Ranges from 1.000 to 1.000 in increments of .001 increments.
levR
Ls
: Ranges from 1.000 to 1.000 in increments of .001 increments.
levRRs
: Ranges from 1.000 to 1.000 in increments of .001 increments.

Table of Contents

Related product manuals