Evolution Robotics ER1 - Hard; Play a Disco Song Every Time Somebody Says the Word Party

ER1 User Guide C-11
Hard
• Click on the Ok button in the Capture Object dialog box.
• Do this again for your coffee cup.
2. Next, from the Object option in Sight, under If, select the ballpoint pen image.
3. Under Then, checkmark Play a Sound and type “ballpoint pen” into the Phrase to
Speak field.
4. Select a new behavior and do the previous step for the coffee cup.
5. Click on ER1’s Run it button.
6. Next time you lose your glasses, just hold up the coffee cup or pen and ER will tell
you which is which.
7. Save the behavior and then click on Open to get a new, blank behavior set.
Tell the kids a bedtime story in your voice while you entertain nearby
1. Record a bedtime story using any standard audio recording system on your computer,
then save the bedtime story file on the robot’s laptop.
2. Then, under If on a blank behavior tab, checkmark Sound and type “story” in the
Listen for field.
3. Under Then, click on Play a Sound and browse for the bedtime story file on ER1’s
harddrive. Click on it and press the Ok button.
4. Click ER1’s Run it button.
5. Say “story” clearly so ER1 can hear.
6. ER1 will begin telling a bedtime story.
7. Save the behavior and then click on Open to get a new, blank behavior set.
Hard
Play a disco song every time somebody says the word “party”
1. Under If on a blank behavior tab, checkmark Sound and type “party” in the Listen for
field.
2. Under Then, click on Play a Sound and browse for a disco song on ER1’s hard disk.
Note that the song must be in
.wav format. Click on it and press the Ok button.
3. Click on the Behavior Settings button in the upper right of the screen.
4. Click on the Run tab and checkmark the box labeled Let behavior run more than
once.
5. Click on the Ok button.
6. Click ER1’s Run it button.
7. Whenever someone says “party” clearly so ER1 can hear, ER1 should begin playing
the disco song.