SMP 300 Series • Remote Communication and Control 117
Command Function SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Port Assignment
NOTES:
• Duplicate port# assignments are not permitted (for example, the Telnet and web port assignment cannot be the same) and E13 error is
returned.
• Remapping of port# assignments must be to ports 1024 or higher (unless resetting to the default port number or disabling the port by setting it
to 0).
Telnet Port
Set Telnet port map E
[port#]MT
}
Pmt[port#]
]
Reset Telnet port map E
23MT
}
Pmt 00023
] Reset the Telnet port to the
default value (23).
Disable Telnet port E
0MT
}
Pmt 00000
]
View Telnet port map E
MT
}
[port#]
]
Web Port
Set web port map E
[port#]MH
}
Pmh[port#]
]
Reset web port map E
80MH
}
Pmh 00080
] Reset the web port to the
default value (80).
Disable web port E
0MH
}
Pmh 00000
]
View web port map E
MH
}
[port#]
]
SNMP Port
Set SNMP port map E
A[port#]PMAP
}
Pmap A[port#]
]
Reset SNMP port map
E
A 161PMAP
}
Pmap A 00161
]
Reset the SNMP port to the
default value (161).
Disable SNMP port
E
A 0PMAP
}
Pmap A 00000
]
View SNMP port map
E
A PMAP
}
[port#]
]
SSH (SIS) Port
Set SSH port map E
B[port#]PMAP
}
Pmap B[port#]
]
Reset SSH port map E
B 22023PMAP
}
Pmap B 22023
] Reset the SSH port to the
default value (22023).
Disable SSH port E
B 0PMAP
}
Pmap B 00000
]
View SSH port map
E
B PMAP
}
[port#]
]
SSL Port
Set SSL port map E
S[port#]PMAP
}
Pmap S[port#]
]
Reset SSL port map E
S 443PMAP
}
Pmap S 00443
] Reset the SSL port to the
default value (443).
Disable SSL port E
S 0PMAP
}
Pmap S 00000
]
View SSL port map E
S PMAP
}
[port#]
]
Echo for SIS over SSH
Enable Echo E
1ECHO
}
Echo 1
] Operate like SSH client.
Disable Echo E
0ECHO
}
Echo 0
] Operate like Telnet (port 23).
View Echo status
E
ECHO
} X(
]
View the Echo setting
KEY:
X(
= Enable/On or disable/off 0 = Disabled/off (default) 1 = Enabled/on (Returns command entered along with response).
To Next Page
Loading...
Need help?
General
