Extron electronics SMP 300 Series User Manual

SMP 300 Series • Remote Communication and Control 123
Command Function SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Recording
Stop recording E
Y0 RCDR
}
RcdrY0
]
Start recording E
Y1 RCDR
}
RcdrY1
]
Pause recording E
Y2 RCDR
}
RcdrY2
]
View record status E
Y RCDR
} X54)]
Extend record time E
E
X54!
RCDR
}
RcdrE
X54! ] For scheduled recordings only,
extend by
X54!
minutes.
Add chapter marker E
B RCDR
}
RcdrB
]
Execute swap
%
Tke
] Swap channel A and channel B
positions.
Recording status
(secondary recording
disabled)
I
<ChA
X50!
* ChB
X50!
> * <
X54^
>*<
X54@
>*<free space in KBytes> *
<time record> * <time remain>
]
Recording status
(secondary recording
enabled)
I
<ChA
X50!
* ChB
X50!
>*<
X54^
>*<internal*
X54@
>*
<internal free space*external free space> * <time
record>*<time remain_internal*time external>
]
NOTE: For view recording time (35I and 36I) 00:00:00 is displayed when not recording.
View recording
duration/elapsed time
of recording
35I
Verbose 2/3 mode
HH:MM:SS
]
Inf35*HH:MM:SS
]
Displays 00:00:00 when not
recording
View record time
remaining (secondary
recording disabled)
36I
Verbose 2/3 mode
X54@
• HH:MM:SS
]
Inf36*
X54@
• HH:MM:SS
]
Displays 00:00:00 when not
recording
View record time
remaining (secondary
recording enabled)
36I
Verbose 2/3 mode:
internal •HH:MM:SS*
X54@
•HH:MM:SS
]
Inf36*internal •HH:MM:SS*
X54@
•HH:MM:SS
]
View record destination
(secondary recording
enabled)
37I
Verbose 2/3 mode
internal *
X54@ ]
Inf37*internal *
X54@ ]
View record destination
(secondary recording
disabled)
37I
X54@ ]
Set record destination E
D
X56)
RCDR
}
RcdrD
X56) ] Select record destination for
recording(s).
View record destination E
D RCDR
} X56)] View recording destination for
next recording.
KEY:
X50!
= Input number 1 to 5
X50@
= Output channel 1 = A (Input 1 and 2), 2 = B (Input 3, 4, and 5)
X54)
= Recording status 0 = Stop, 1 = Record, 2 = Pause
X54!
= Time MM (0 to 60 minutes)
X54@
= Recording destination auto, internal, usbfront, usbrear, usbrcp
X54^
= Recorder status stopped, usbfront, usbrear, usbrcp, N/A
X56)
= Destination 0 = Auto, 1 = Internal, 2 = USBFront, 3 = USBRear,, 4 = USBRCP,
11 = Internal + Auto, 12 = Internal + USBFront, 13 = Internal + USBRear,
14 = Internal + USBRCP
Audio-only Recording
Enable audio‑only
recording
E
A1 * 1RCDR
}
RcdrA1 *1
]
Disable audio‑only
recording
E
A1 * 0RCDR
}
RcdrA1 *0
]
View status E
A1RCDR
} X( ]
KEY:
X(
= On/off 0 = Disabled (default), 1 = Enabled

Extron electronics SMP 300 Series Specifications

General

Brand	Extron electronics
Model	SMP 300 Series
Category	Computer Hardware
Language	English