Extron electronics SMP 300 Series User Manual

SMP300 Series • Web-Based User Interface 65
Storage Information
The storage information table (see figure41) the Stream URL panel (also available in File
Management on page95) displays the names of the available connected storage
devices, their locations (internal, USB front panel port, USB rear panel port, USB RCP port),
total capacity, and amount of used and available storage space. It also provides an estimate
of remaining recording time for each drive and indicates (with a check mark) which drive is
selected as the only or primary recording location. If the SMP is set for dual recording mode,
a second check mark symbol indicates the drive selected as the secondary recording
location.
NOTE: The capacity of the internal drive shown in the Total column depends on the
options selected for the device. The SMP 352 has 440Gigabytes. The SMP351 has
the options of 80 Gigabyte models and 440Gigabyte models available for purchase.
Figure 41. Recording Controls, Storage Information Table
NOTES:
• Recordings stored on the internal drive can be automatically uploaded to a network
server (see Setting the Default Recording Media on page90).
• If internal storage space is nearly full and the SMP is set up to automatically upload
recordings to a server, the SMP uses an automatic disc cleanup feature to make
room for new recordings. As needed, the unit automatically deletes recordings
previously uploaded to a server, starting with the oldest recordings, until there is
enough free space on the disk.
• For details on recording deletion, see Deleting Recordings in the
SMP300Series Embedded Web Pages Help File.
• To learn how to lock a recording to prevent it from being automatically deleted, see
Locking and Unlocking a Recording Package Folder in the SMP300Series
Embedded Web Pages Help File.
41

Extron electronics SMP 300 Series Specifications

General

Brand	Extron electronics
Model	SMP 300 Series
Category	Computer Hardware
Language	English