·372·
Programming manual
CNC 8055
CNC 8055i
13.
HIGH-LEVEL LANGUAGE PROGRAMMING
·M· & ·EN· MODELS
SOFT: V02.2X
Variables
IDHARH IDHARL
They return, in BCD code, the hardware identification number corresponding to the KeyCF. It is the
number appearing on the software diagnosis screen.
Since the identification number has 12 digits, the IDHARL variable shows the 8 least significant bits
and the IDHARH the 4 most significant bits.
Example:
SOFCON
They return the software version numbers for the CNC and the hard disk.
Bits 15-0 return the CNC software version (4 digits)
Bits 31-16 return the software version of the hard disk (HD) (4 digits)
For example, SOFCON 01010311 indicates:
HDMEGA
It returns the size of the hard disk (in megabytes).
KEYIDE
Keyboard code, according to the auto-identification system.
000029AD IDHART
29ADEE020102
EE020102 IDHARL
Hard disk (HD) software version 0101
CNC software version 0311
... 31 30 29 ... 18 17 16 15 14 13 ... 2 1 0
LSB
HD Software CNC Software
KEYIDE CUSTOMY (P92) Keyboard
0 - - - Keyboard without auto-identification.
130 254 Mill model keyboard.
131 254 Lathe model keyboard.
132 254 Conversational mill model keyboard.
133 254 Conversational lathe model keyboard.
134 254 Educational model keyboard.
135 252 Operator panel: OP.8040/55.ALFA.
136 0 Operator panel OP.8040/55. MC.
137 0 Operator panel OP.8040/55. TC.
138 0 Operator panel OP.8040/55. MCO/TCO.
To Next Page
Loading...
