Fagor 8055 M - Page 460

·460·
Programming manual
CNC 8055
CNC 8055i
C.
·M· & ·EN· MODELS
SOFT: V02.2X
Summary of internal CNC variables.
Software & hardware configuration variables.
Variables associated with telediagnosis.
Operating-mode related variables.
Other variables.
Variable CNC PLC DNC
( section 13.2.17 )
HARCON R R R It indicates, with bits, the CNC's hardware configuration.
HARCOA R R R It indicates, with bits, the CNC's hardware configuration.
IDHARH R R R Hardware identifier (8 least significant bits).
IDHARL R R R Hardware identifier (4 most significant bits).
SOFCON R R R Software version of the CNC (bits 15-0) and HD (bits 31-16)
HDMEGA R R R Hard disk size (in megabytes).
KEYIDE R R R Keyboard code, according to the auto-identification system.
MODEL R R R It identifies the CNC model, mill or lather.
Variable CNC PLC DNC
( section 13.2.18 )
HARSWA R R R Hardware configuration.
HARSWB R R R Hardware configuration.
HARTST RRRHardware test.
MEMTST R R R Memory test.
NODE R R R Node number in the Sercos ring.
VCHECK R R R Software version checksum.
IONODE R R R Position of the "ADDRESS" switch of the I/O CAN bus.
IOSLOC R R R Number of local I/O available.
IOSREM R R R Number of remote I/O available.
Variable CNC PLC DNC
( section 13.2.19 )
OPMODE R R R Operation mode.
OPMODA R R R Operating mode when working in the main channel.
OPMODB R R R Type of simulation.
OPMODC R R R Axes selected by handwheel.
Variable CNC PLC DNC
( section 13.2.20 )
NBTOOL R - R Number of the tool being managed..
PRGN R R R Number of the program in execution.
BLKN R R R Label number of the last executed block.
GSn R - - Status of the indicated G function (n).
GGSA - R R Status of functions G00 thru G24.
GGSB - R R Status of functions G25 thru G49.
GGSC - R R Status of functions G50 thru G74.
GGSD - R R Status of functions G75 thru G99.
GGSE - R R Status of functions G100 thru G124.
GGSF - R R Status of functions G125 thru G149.
GGSG - R R Status of functions G150 thru G174.
GGSH - R R Status of functions G175 thru G199.
GGSI - R R Status of functions G200 thru G224.
GGSJ - R R Status of functions G225 thru G249.
GGSK - R R Status of functions G250 thru G274.
GGSL - R R Status of functions G275 thru G299.
GGSM - R R Status of functions G300 through G324.
GGSN - R R Status of functions G325 thru G349.
GGSO - R R Status of functions G350 thru G374.
GGSP - R R Status of functions G375 thru G399.
GGSQ - R R Status of functions G400 thru G424.
MSn R - - Status of the indicated M function (n)
GMS - - R Status of M functions: M (0..6, 8, 9, 19, 30, 41..44).
PLANE R R R Abscissa and ordinate axes of the active plane.