FARGO electronics PERSONA C30 - Using the Overlay; Print Area Dropdown Menu

To Next Page

To Previous Page

RESTRICTED USE ONLY Fargo Electronics, Inc.

Persona C30 Card Printer User Guide (Rev. 2.2)

5-55

Using the Overlay / Print Area dropdown menu

Step Procedure

Select the Full Card option for the Printer to overlay and/or print the entire card.

Select the Defined Area(s) option for the Printer to overlay and/or print only in

the selected and defined area or areas.

Select the Undefined Area(s) option for the Printer to overlay and/or print only in

the space outside the selected and defined area.

Select the Omit Smart Chip Area option for the Printer to overlay and/or print

only in the space outside the standard location of a smart chip.

Select the Omit Magnetic Stripe Area option for the Printer to overlay and/or

print only in the space outside the standard location of an ISO Magnetic Stripe.

Select the Omit Signature Area option for the Printer to overlay and/or print only

in the space outside the standard location of a signature panel.

(Note: In the card grid, black indicates the area in which the overlay and/or

printing will be applied.)

Other manuals for FARGO electronics PERSONA C30