FARGO electronics PERSONA C30 - Printing a Test Print Image

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
3-25
Printing a Test Print Image
Step Procedure
1 a. From your computer’s startup menu, select Settings > Printers and Faxes
(Windows XP) or > Printers (Windows 98SE, Me and 2000).
b. Double click on the Persona C30 Card Printer under the Printers window.
c. Select Printing Preferences under the Printer drop-down menu. This will bring
up the Persona C30 Printing Preferences window.
2
a. Select the Card tab, and then click on the Test Print button, as shown in
Display A in this section. (Note: Ensure that the Ribbon is installed before
proceeding. The correct Ribbon type is selected in the Device Options
tab.)
b. When the Test Print button is selected, an image is copied to the Printer.
Display A - Persona C30 Printer Driver Card Tab: