RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
15-1
Section 15: Index
A
About button, 5-13
AC - Alternating Current, 14-1
Accepted Card Thickness, 2-2
Accepted Card Types, 2-2
Accepted Standard Card Sizes, 2-2
Access Card, 14-1
Adhesion, 14-1
Adjusting the Image Darkness, 4-42, 4-44
Agency Listings, 2-2
Algebraic, 5-20, 14-1
ANSI (American National Standards Institute), 14-1
AS400, 14-1
ASCII (American Standard Code for Information
Interchange), 14-1
ASCII Code, 5-49
ASCII Offset, 5-44
AT, 14-1
automated Flipping Module, 2-12
B
B (Black), 14-1
Barcodes, 14-2
Batch print, 14-2
Battery Back-up, 14-2
Bi-directional, 14-2
BIOS (Basic Input/Output System), 14-2
Bit, 14-2
Bit Density, 5-41
Bit map, 14-2
blocked Sensor, 4-31
Board, 14-2
Boot-up, 14-2
Buffer, 14-2
C
Cable, 14-2
Cache, 14-3
Calibrate tab, 4-34, 4-48, 5-32
Calibrating, 14-3
Cancel button, 2-6
Card Cleaning Roller, 2-6
Card Design, 2-11
Card Feeding Errors, 4-5, 4-6, 4-8, 4-10, 4-13, 4-16, 4-
18, 4-20, 4-23, 4-25, 4-27, 4-29, 4-31
card grid, 5-60
card grid area, 5-59
card grid lines, 5-61
card input, 5-94
Card Input Hopper, 2-6
Card Input Hopper Capacity, 2-2
card orientation, 5-62
card output, 5-94
Card Size, 2-11
card stock scratches, 4-39
Card Surface, 2-11
cards look pixilated or grainy, 4-51
card's Magnetic Stripe/smart chip, 5-26
CD (Compact Disc), 14-3
Centronics, 14-3
Character, 5-49
Character ASCII Offset, 5-44
Character Parity, 5-45
Character Size radio buttons, 5-42
Cleaning Inside Printer, 4-40
Cleaning Roller, 14-3
Cleaning the Printhead, 4-39
Clear Protective Overlay Panel, 2-7
Coercivity, 14-3
Color matching, 14-3
Color Matching, 5-20
Color Matching software, 5-20
Colored Resin, 2-8
Colors, 2-2
Communication Errors, 4-2, 4-3
Compressed air, 14-3
Contrast, 14-3
Contrast / Gamma, printed image, 5-28
Control panel, 14-3
CR-100, 14-4
CR-79, 14-4
CR-80, 14-4
CR-80 card size, front/back, 5-78, 5-79, 5-80
CR-90, 14-4
CSA, 2-1
Cursor, 14-4
customized ID software applications, 5-48
D
Darkness, 14-4
Data Cables, 4-34
DB-9, 14-4
DC (Direct Current), 14-4
DC Motor, 14-4
Default, 14-4
Default button, 5-31, 5-38
default ISO Standard selections, 5-41, 5-45
default location, 5-82
defined area, 5-62
Defined Area arrows, 5-63
Defined area(s), 5-81
Defined Area(s) check box, 5-81, 5-82, 5-83, 5-87, 5-88,
5-90, 5-91, 5-96, 5-98, 5-99, 5-102
Defined Area(s) option, 5-55, 5-60, 5-79
Defined/undefined area(s), 5-78, 5-80
Defrag, 14-4
Delete button, 5-63
Device Option tab, 4-27
Diagnostic Utility / Diagnostics Tool, 5-9
dimension boxes, 5-82
DIP switches (Dual In-line Package Switches), 14-4
Direct-to-Card (DTC) Printing, 14-5
Disable Printing option, 5-27
To Next Page
Loading...
