FARGO electronics PERSONA C30 - Flipper Table Module Assembly Problems; Resolving the no Flipper Table Module Problem

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
4-36
Flipper Table Module Assembly Problems
Resolving the No Flipper Table Module problem
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer. See the Flipper Table Module Installation section (as needed).
Step Procedure
1 Review the following information.
 Symptom: The Flipper Table Module Assembly is not functioning.
 Printer Error State: The Printer is unable to communicate with the Flipper
Module.
 Driver Monitor Error Display: No Flipper Module