FARGO electronics PERSONA C30 - Resolving a Ribbon Break Jam Error

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
4-19
Resolving a Ribbon Break Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
NOTE: Using the printer in direct sunlight may adversely affect the ribbon sensor integrity.
Step Procedure
1 Review the following information.
 Symptom: The Print Ribbon has become jammed or has broken in the
Printer
 Printer Error State: The Ribbon Supply Encoder Sensor has
unexpectedly stop receiving information from the Ribbon Encoder
 Driver Monitor Error Display: Ribbon BreakJam