FARGO electronics PERSONA C30 - Printer Module: Flipper Table Module Assembly (D900200)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
2-12
Printer Module: Flipper Table Module Assembly (D900200)
The Flipper Table Module Assembly (D900200) is an automated Flipping Module that
allows the Printer to print on the frontside and backside of each card.
Display: Flipper Table Module Assembly
Here are references within this document.
 See the Flipper Table Module Assembly Problems procedures.
 See the Print Both Sides option in the Using the Device Options tab (C30) section.
 See the Front and Back radio buttons in the Using the Overlay / Print Area tab
(Persona C30) section.
 See the Front and Back radio buttons in the Using the K Panel Resin tab (C30)
section.
 See the Persona C30 Card Printer User Guide for the replacement procedures for this
Printer.