RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
3-15
Printer Driver Installation
Installing the Printer Driver
Step Procedure
1 Close all programs and insert the Software Installation CD into your computer’s
CD drive. After a few seconds, the CD’s installer program will automatically
open.
Follow the CD’s on-screen Procedures to complete installation.
(Note: If the CD does not automatically open, use My Computer or Windows
Explorer to view the contents of the CD. Then, double-click on the Setup.exe file
listed on the CD.)
2 Click on the following buttons to install the appropriate Printer Driver and Online
User’s Guide, as shown below:
INSTALL button for the C30 Card Printer/Encoder
To Next Page
Loading...
