RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
4-21
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
NOTE: Using the printer in direct sunlight may adversely affect the ribbon sensor integrity.
Step Procedure
1 Review the following information.
Symptom: Printer will not print.
Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark
Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon Cartridge
a. Press on the Resume button.
To Next Page
Loading...
