RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
15-4
Print Drive Stepper, 9-2
Print Driver, 14-14
Print Job, 14-14
Print K Only options, 5-88, 5-90, 5-91, 5-96, 5-98, 5-99,
5-102
Print Length option, 5-95
Print Method, 2-3
Print Ribbons, 2-7
Print Server, 14-14
print the first page of a two-page document, 5-24
Print YMC Under K option, 5-88
printable area, 5-32
Printed cards
dark or light, 4-41
printed image diagram, 5-34
Printer Driver setup screen, 5-39
Printer Drivers, 2-3
Printer's memory, 5-32
Printhead, 2-6, 14-15
Printhead power cable, 4-34
Prox Card Encoder, 14-15
Proximity cards, 2-11
PVC, 14-15
PVC laminate, 2-11
Q
Queue, 14-15
R
RAM (Random Access Memory), 14-15
Rasterize, 14-15
Reboot, 14-15
Registration, 14-15
Regulatory Compliances, 2-1
Reject Hopper, 4-13
Reset Printer, 4-34
Resident Font, 14-15
Resin, 14-15
resin black (K) panel, 5-77, 5-78, 5-88
Resin Black Panel, 2-7
resin dither, 5-21
Resin Heat slide, 5-29, 5-30
Resin Thermal Transfer, 2-5
Resolution, 2-3, 14-16
RFI (Radio Frequency Interference), 14-16
RGB (Red/Green/Blue), 14-16
Ribbon, 14-16
Ribbon / Cards, 1-2, 5-4, 6-1, 9-1
Ribbon cable, 14-16
Ribbon Panels, 5-23
Ribbon Sensor Calibration, 4-53
Ribbon Type option, 5-15
Ribbon wrinkle problems, 4-44
RibbonTraq, 14-16
RMA number, 14-16
Roller, 14-16
Roller Up/Down Error, 4-31
Rotate Front 180 Degrees option, 5-62, 5-83
rotate front by 180 Degrees, 5-26
rotates image, 5-26
RS-232, 14-16
S
safety issues, 1-2, 4-1, 5-4, 6-1, 9-1, 11-2
Safety Standards, 2-2
Saturation, 14-16
second K Panel, 5-23
Selecting Orientation - Landscape under Card tab, 5-65
Selecting Orientation – Portfolio under Card tab, 5-67
Selecting the number of copies, 5-8
Selecting the Visual Security Solutions, 5-68, 5-69, 5-70
Selecting the Visual Security Solutions dropdown menu,
5-66
Self-test, 4-52, 4-54, 14-17
Sending data to Track 1, 5-49
Sensor, 14-17
Sensors button, 5-35
Serial interface, 14-17
Settings button, 4-49, 4-50
Shift Data Left checkbox, 5-46
Shift Data Left option, 5-46
SIMM, 14-17
Simplex, 14-17
Smart Card, 14-17
SmartGuard, 14-17
SmartShield™, 14-17
Software, 14-17
special precautions, 1-2, 5-4, 6-1, 9-1
Split 1 Ribbon Panels, 5-23
Spooler, 14-17
Spooling, 14-18
SS (Start Sentinel), 14-18
Stacker, 14-18
Standard Resin Black (K), 2-8
Standard Self-test (YMC), 4-53
Start Sentinel (SS), 5-48
Stepper Motor, 14-18
String, 14-18
Supply Frequency, 2-4
Supply Voltage, 2-4
Surface mount, 14-18
Switch box, 14-18
System Requirements, 2-4
T
TAC, 14-18
Temp file, 14-18
Test Core Pins (Lam), 4-53
Test Core Pins (Print), 4-53
Test Print option, 5-12
Test-print, 14-18
Tests Magnetic Encoding, 4-53
Thermistor, 14-18
Thermocouple, 14-19
Through-hole, 14-19
Timeout, 14-19
TOF (Top of Form), 14-19
Track, 14-19
Track 2, 5-39
Track Data Note, 5-49
To Next Page
Loading...
