17 Advanced functions
FLUXUS F60* 17.8 Calculation channels
161
UMFLUXUS_F60xV5-0EN, 2017-10-16
17.8.3 Output options for a calculation channel
• Select a calculation channel in the program branch Output Options.
• Press ENTER.
• Select the physical quantity to be calculated.
• Press ENTER.
Make sure that the physical quantity selected for the calculation channel can be calculat-
ed from the physical quantities of the selected measuring channels. Possible combina-
tions are shown in Tab. 17.2.
Output Options\for Channel Y:
Output Options\for Channel Y:\Physic. Quant.
Tab. 17.2: Physical quantity of the calculation channel
physical quantity
of the calculation
channel
possible physical quantity of
the first measuring channel
possible physical quantity of
the second measuring channel
flow
velocity
volume flow
rate
mass flow
rate
heat flow
flow
velocity
volume flow
rate
mass flow
rate
heat flow
flow velocity
xxxxxxxx
volumetric flow rate
xxx xxx
mass flow rate
xxx xxx
heat flow
xx
The difference of the volume flow rates of the channels A and B is to be calculated.
The physical quantity of the measuring channel A and B can be the volumetric flow
rate or the mass flow, but not the flow velocity. The physical quantities of the 2 measur-
ing channels do not need to be identical (channel A = mass flow, channel B = volumet-
ric flow rate).
To Next Page
Loading...
