FlexRadio Systems FLEX-6000 Signature Series - Page 142

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 133
Copyright 2018 FlexRadio Systems. All Rights Reserved.
• Click on the SAVE button to save the configuration changes
Shown below is an example of the Fldigi Sound Card Configuration for DAX
Setting up FLDIGI to use DAX audio channels is done in the Fldigi configuration panel. Click Configure,
Sound Card and the Audio Tab to bring up the sound card selection page. Using the PortAudio option,
click the capture and playback selection boxes to choose the DAX channels you want to use