Copy
98
Copy
3
* : Load a document in landscape orientation ( ) to match the paper orientation loaded in the tray.
z
How to load a document depends on the size and orientation of a document. For more information, refer to "Step 1 Loading
Documents" (P.80).
z
For information on paper that can be loaded, refer to "Paper and Other Media" > "Paper Types" in the
Administrator Guide.
îš„ Preset %
Select a copy ratio from the following options.
îš‹ 100%
Copies at the same image size as the original document.
îš‹ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
z
This cannot be selected together with [Auto Select] under [Paper Supply].
îš‹ Preset ratios
Select from the preset ratios.
z
You can change the copy ratio associated with each button. For information on the settings, refer to "Tools" > "Copy Service
Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
îš„ Slight Reduction (Improves Fit)
Select this check box to slightly reduce the specified copy ratio to copy the complete image
onto the paper.
z
If you select [Slight Reduction (Improves Fit)] and you do not want to erase the edges of the document, set
the amount of edge erase to 0 mm. Note that if the amount is set to 0 mm, the edges of the copied
document may get dirty. You can set [Edge Erase] on the [Layout Adjustment] screen. For more information,
refer to "Edge Erase (Erasing Edges and Margin Shadows of the Document)" (P.129).
When [Independent X - Y%] is Selected
You can specify reduction/enlargement ratios for the width and length individually.
B4 40% 50% 57% 70% 81% 100% 115%
A3 35% 43% 50% 61% 70% 86% 100%
Copy
/
Original
A6 B6 A5 B5 A4 B4 A3
To Next Page
Loading...
Need help?
General
