Copy
97
Copy
3
îš„ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
z
This cannot be selected together with [Auto Select] under [Paper Supply].
îš„ Ratios (3rd and 4th buttons)
Displays preset copy ratios.
z
You can change the copy ratio associated with each button. For information on the settings, refer to "Tools" > "Copy Service
Settings" > "Preset Buttons" > "Reduce/Enlarge - Button 3 - 4" in the Administrator Guide.
îš„ More
Displays the [Reduce/Enlarge] screen on which you can set [Proportional %], [Independent
X - Y%], and [Calculator %].
z
For information on the settings on the [Reduce/Enlarge] screen, refer to "When [Proportional %] is Selected" (P.97), "When
[Independent X - Y%] is Selected" (P.98), or "When [Calculator %] is Selected" (P.99).
When [Proportional %] is Selected
You can select a ratio from the standard copy ratios, or can enter a ratio directly.
1 Select a copy ratio, or specify a value.
îš„ Variable %
Specify a ratio in the range from 25 to 400% in 1% increments. To specify a value, use the
numeric keypad or [+] and [-]. Specifying "100%" allows you to make copies at the same
image size as the original document.
When you make enlarged/reduced copies from standard sized documents on standard
sized paper, the following copy ratios will be applied.
Copy
/
Original
A6 B6 A5 B5 A4 B4 A3
A6 100% 122% 141% 173% 200%
245%
*
283%
*
B6 81% 100% 115% 141% 163%
200%
*
230%
*
A5 70% 86% 100% 122% 141%
173%
*
200%
*
B5 57% 70% 81% 100% 115%
141%
*
163%
*
A4 50% 61% 70% 86% 100% 122% 141%
To Next Page
Loading...
Need help?
General
