Fujitsu Eternus DX90 S2 - Page 100

Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > set flexible-tier-sub-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
100
■ Example(s)
For the ETERNUS DX8700 S2:
cm0cpu0 Controller module#0 CPU#0
cm0cpu1 Controller module#0 CPU#1
cm1cpu0 Controller module#1 CPU#0
cm1cpu1 Controller module#1 CPU#1
cm2cpu0 Controller module#2 CPU#0
cm2cpu1 Controller module#2 CPU#1
cm3cpu0 Controller module#3 CPU#0
cm3cpu1 Controller module#3 CPU#1
cm4cpu0 Controller module#4 CPU#0
cm4cpu1 Controller module#4 CPU#1
cm5cpu0 Controller module#5 CPU#0
cm5cpu1 Controller module#5 CPU#1
cm6cpu0 Controller module#6 CPU#0
cm6cpu1 Controller module#6 CPU#1
cm7cpu0 Controller module#7 CPU#0
cm7cpu1 Controller module#7 CPU#1
auto Automatically (default)
The following example automatically sets the assigned CM for FTSP0001:
CLI> set flexible-tier-sub-pool -ftsp-name FTSP0001 -assigned-cm auto