Fujitsu Eternus DX90 S2 - Format Volume

Chapter 3 Configuration Settings and Display
3.4 Volume Management > format volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
162
format volume
This command will format volume(s).
The "format flexible-tier-volume" command is used to format Flexible Tier Volumes (FTVs).
■ Syntax
■ Parameter
■ Example(s)
format volume {-volume-number volume_numbers | -volume-name volume_names }
-volume-number
or
-volume-name
This parameter specifies the volume identifiers to be formatted. One or more RAID groups can
be specified at the same time. For details, refer to "1.2.9 Volume Syntax" (page 22)
.
The following example only formats the volume named "VOL001":
CLI> format volume -volume-name VOL001
The following example formats consecutive volumes #80 - #99 at the same time:
CLI> format volume -volume-number 80-99