Fujitsu Eternus DX90 S2 User Manual

Chapter 4 Function/System Settings and Display
4.1 User Management > delete role
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
360
delete role
This command deletes a specified user-defined role. Note that any roles that are already assigned to users
cannot be deleted.
■ Syntax
■ Parameter
■ Example(s)
delete role -name name
-name This parameter specifies the role name that is to be deleted. Only one parameter can be
specified at the same time.
The following example deletes the role named "Role2":
CLI> delete role -name Role2

Fujitsu Eternus DX90 S2 Specifications

General

Brand	Fujitsu
Model	Eternus DX90 S2
Category	Storage
Language	English