Chapter 4 Function/System Settings and Display
4.3 Network Management > export ssl-certificate-request
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
536
export ssl-certificate-request
This command exports the CSR (Certificate Signing Request) file and server key file that were generated to
send to the certificate provider.
■ Syntax
■ Parameter
export ssl-certificate-request -port {maintenance | remote | fst} -server
server_name
-user
login_user_account
[-csr-filename
csr-filename
] [-key-filename
key-filename
]
[-key-length {1024 | 2048 | 4096}] -country-name
country_name
-state-province-name
state_province_name
-locality-name
locality_name
-organization-name
organization_name
-organization-unit-name
organization_unit_name
-common-name
common_name
[-subject-alt-name
altname1
,
alitname2
...]
[-indicator {enable | disable }]
-port This parameter specifies which Ethernet port is used to connect to the FTP server.
For details, refer to "1.11 Note for Specifying FTP Server" (page 31)
.
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
-server This parameter specifies the name of the FTP server on which the CSR/key file are loaded. The
server name should be in IPv4 standard notation (a base 256 "d.d.d.d" string) format, IPv6
address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
-user This parameter specifies the user account name for access to the FTP server. This command
displays an FTP server password prompt.
To Next Page
Loading...
