Fujitsu Eternus DX90 S2 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
323
show host-groups
This command displays existing host groups.
■ Syntax
■ Parameter
■ Output
show host-groups
[-host-group-number
host_group_numbers | -host-group-name host_group_names | -all]
[-host-number
host_numbers | -host-name host_names ]
-host-group-number
or
-host-group-name
Optional. This parameter specifies the host group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing host groups
will be displayed. For details, refer to "1.2.16 Host Group Syntax" (page 26)
.
-all Optional. When this parameter is specified, the details of all the existing host groups are
displayed.
-host-number
or
-host-name
Optional. This parameter specifies the host that is included in the host group that is to be
displayed in detail. One or more parameters can be specified. For details, refer to "1.2.16 Host
Group Syntax" (page 26).
When the parameter is omitted, a summary of all the existing host groups is displayed.
# Host Group Host Response Host Type
# No. Name No. Name
# 0 hg 250 Solaris MPxIO FC/FCoE
# 1 FCoE 250 Solaris MPxIO FC/FCoE
# 2
iscsi 254 AIX Single Path iSCSI
A B C D E
AHost group number
BHost group name
C Host response number
D Host response name
E Host type

Fujitsu Eternus DX90 S2 Specifications

General

Brand	Fujitsu
Model	Eternus DX90 S2
Category	Storage
Language	English