Fujitsu Eternus DX90 S2 - Delete Host-Wwn-Name

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete host-wwn-name
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
230
delete host-wwn-name
This command deletes existing FC or FCoE host identifier(s).
■ Syntax
■ Parameter
■ Example(s)
delete host-wwn-name {-host-number host_numbers | -host-name host_names }
-host-number
or
-host-name
This parameter specifies the FC or FCoE host identifiers to be deleted. One or more parameters
can be specified at the same time. For details, refer to "1.2.10 Host Syntax" (page 23)
.
The following example deletes the FC hosts with consecutively numbered identifiers #1-#3:
CLI> delete host-wwn-name -host-number 1-3
The following example only deletes the host named "HBA2":
CLI> delete host-wwn-name -host-name HBA2