Fujitsu Eternus DX90 S2 - Page 156

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
156
■ Example(s)
The following example displays a list of all the volumes that exist in the system:
CLI> show volumes
Volume Status Type Encryption Expansion RG or TPP or FTRP Size(MB) Reserved Copy
No. Name (Concatenation) No. Name Deletion protection
1 VOL001 Available Standard CM 10 10 RGP010 134217728 enable
2 VOL002 Available Standard Encrypting - 10 RGP010 512 disable
3 V0L003 Available SDV Decrypting - 12 RGP-#12 2048 enable
4 V0L004 Available SDPV OFF - 13 RGP-#13 1024 No disable
5 VOL005 Available Standard OFF 3 10 RGP010 3072 enable
6 V0L006 Available SDPV OFF - 14 RGP-#14 1024 No disable
7 V0L007 Available TPV CM - 01 TPP001 1024 disable
8 VOL008 Available FTV CM - 01 FTRP001 1024 disable
9 VOL009 Available MVV(G) CM - 15 RGP-#15 1024 disable
10 VOL010 Available WSV OFF - 16 RGP-#16 1024 disable
The following example displays a list of all the volumes that exist in the RAID group named "RGP010". Free
space information is also displayed:
CLI> show volumes -rg-name RGP010
Volume Status Type Encryption Expansion RG or TPP or FTRP Size(MB) Reserved Copy
No. Name (Concatenation) No. Name Deletion protection
1 VOL001 Available Standard CM 1/10 10 RGP010 2048 enable
2 VOL002 Available Standard Encrypting - 10 RGP010 512 disable
5 VOL005 Available Standard OFF 1/ 3 10 RGP010 1024 enable
The following example displays a list of all the mainframe volumes that exist in the RAID group named
"RGP011". Free space information is also displayed:
CLI> show volumes -rg-name RGP011
Volume Status Type RG or TPP Size(MB) Copy
No. Name No. Name protection
----- -------------------------------- ------------------------- -------- --- -------------------------------- --------- ----------
- - Available MLU 11 RGP011 - -
- - Available MLU 11 RGP011 - -
- - Available MLU 11 RGP011 - -
The following example only displays a list of SDPV type volumes:
CLI> show volumes -type sdpv
Volume Status Type Encryption Expansion RG or TPP or FTRP Size(MB) Reserved Copy
No. Name (Concatenation) No. Name Deletion protection
4 V0L004 Available SDPV OFF - 13 RGP-#13 1024 No disable
6 V0L006 Available SDPV OFF - 14 RGP-#14 1024 No disable
The following example only displays a list of TPV type volumes:
CLI> show volumes -type tpv
Volume Status Type Encryption RG or TPP or FTRP Size(MB) Copy Used Measurements Attention Balancing Used
No. Name No. Name Protection Status (%) Level Capacity(MB)
7 V0L007 Available TPV CM 01 TPP001 1024 disable Normal 100 70 High 0
8 VOL008 Available TPV CM 01 TPP002 1024 disable Attention >500 80 Low 0
The following example only displays a list of FTV type volumes:
CLI> show volumes -type ftv
Volume Status Type Encryption RG or TPP or FTRP Size(MB) Copy Used Measurements Attention Priority Used
No. Name No. Name Protection Status (%) Capacity(MB)
9 FTV009 Available FTV CM 01 FTRP001 1024 disable Normal 100 70 0 0
10 VOL010 Available FTV CM 01 FTRP002 1024 disable Attention >500 80 1 0
The following example only displays a list of WSV type volumes:
CLI> show volumes -type wsv
Volume Status Type Encryption Wide Stripe RG or TPP or FTRP Size(MB) Reserved Copy
No. Name Size No. Name Deletion Protection
0 OLU#0 Available WSV OFF Normal 0 RLU#0 256 Disable
1 OLU#1 Available WSV OFF Normal 1 RLU#1 256 Disable
2 OLU#2 Available WSV OFF Small 2 RLU#2 256 Disable