3.6 Using the Network Settings Menus
Network Scanner fi-6000NS Operator's Guide 85
Administrator Operations
3
4. For the SMTP server, select whether to set a server name or IP address.
Both the [Server Name] and [IP Address] buttons cannot be selected at the same time.
5. Enter the SMTP server or IP address (selected in Step 4).
• If the [Server Name] button is selected:
Enter a FQDN or server name in the input field. This may be up to 255 characters long. If
the SMTP server setting is not required, leave the field blank.
• If the [IP Address] button is selected:
Enter a numerical IP address.
If the SMTP server setting is not required, enter "0.0.0.0".
6. Set the "Maximum Attachment Size" for e-mails. This may be between one and ten
MB.
The default size is "1MB".
7. Press the [OK] button.
⇒ The SMTP server is set.
To Next Page
Loading...
