3.6 Using the Network Settings Menus
Network Scanner fi-6000NS Operator's Guide 111
Administrator Operations
3
6. Select a computer .
⇒ If login is required, a login authentication screen appears.
If login is not required, the network tree expands and computer names are displayed
under the selected domain.
1. Enter a User Name.
This may be up to 256 characters long.
2. Enter a Password.
This may be up to 256 characters long.
3. Press the [OK] button.
⇒When the user name and password is valid, or if login is not required, the network tree
expands and network folders are displayed under the selected computer name.
7. Select a network folder .
The selected folder will be opened to show any sub-folders, which themselves may be
selected in turn (up to seven levels deep, including the parent domain).
8. Press the [Select] button.
⇒ The selected network folder is added.
To Next Page
Loading...
