112
.
• The default network folder alias will be the same as the alias selected
from the network tree. For details on changing the folder alias, refer to
"Renaming a Network Folder" (page 113).
• Select a readable and writable network folder.
• The "Caps Lock" and "Num Lock" indicators are shown when the admin-
istrator logs in via the scanner's touch panel.
The "Caps Lock" indicator is on if the keyboard's Caps Lock is set.
The "Num Lock" indicator is on if the keyboard's Num Lock is set.
• The "Network" tree can contain up to 400 domain, computer, and network
folder items. However, screen response may slow down when the num-
ber of items exceed 150. Close unneeded items.
• Set the network path in the following format:
\\Domain_name\Computer_name\Folder_name[\Folder_name]
The minimum requirement for a network path is
"\\Domain_name\Computer_name\Folder_name".
Sub folders ([\Folder_name] is the example above) are optional.
"Folder Alias" or "Network Path" may be up to 255 characters long.
"/" and "\" can be used as a delimiter for the folder alias.
For the Domain_name, specify the NetBIOS domain name or the
workgroup name that the network folder belongs to. For the
Computer_name, specify the FDQN, host name, or IP address format.
When pressing the [Add] button without entering a "Folder Alias", the
folder alias will be the same as the network folder.
Pressing the [Network Tree] button returns to the network tree selection
screen.
To Next Page
Loading...
