5.2 Cleaning the ADF
Network Scanner fi-6000NS Operator's Guide 275
Scanner Care
5
• Feed rollers
Use the following procedure when cleaning the feed rollers.
1) On the "Main Menu" screen, press the [Maintenance] button.
⇒ The "Maintenance" screen appears.
2) Press the [Roller Cleaning] button.
⇒ A guide screen for cleaning the rollers appears.
3) Open the top cover.
4) Lightly press a soft cloth moistened with Cleaner F1 against the surface of the feed
rollers.
5) Press the [c] key on the keyboard.
⇒ The feed rollers will advance one step each time the [c] key is pressed.
Lightly press a soft cloth moistened with cleaning fluid against the surface of
the rotating rollers to clean them. Pressing the [c] key seven times will turn the
roller one complete revolution. The feed rollers should be cleaned carefully and
thoroughly, as dirty pick rollers can adversely affect the paper pickup
performance.
In Step 5, all four feed rollers will turn at the same time.
When cleaning the feed rollers, be careful not to touch the
rollers with your fingers while they are rotating.
To Next Page
Loading...
