338
Scanner Name Scanner name contains invalid charac-
ters.
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
"/\ [ ] : | < > + = ; , ?
Scanner name has not been entered. Enter a scanner name.
Specified scanner name is already
being used.
Enter a different scanner name.
The new settings will be enabled after
the system has been restarted. Do you
wish to restart the system now or
later?
Now: Restart the system immediately.
Net-login will not be possible until the
restart completes.
Later: The system will be restarted and
the settings enabled when you logout.
Cancel: Cancel the new settings.
Press the [Now] button to cause
the system to restart immediately.
Press the [Later] button to delay
the system restart until other set-
tings are done.
Press the [Cancel] button to cancel
the new settings.
Screen Message Action
To Next Page
Loading...
