Network Scanner fi-6000NS Operator's Guide 339
C
Scanner Set-
tings
Multifeed detection limit #2 must be
larger than limit #1.
Re-enter a value for "#2" that is
larger than the value for "#1".
Multifeed detection limit #1 is invalid. Re-enter a value for "#1" that is
between 0 and 510 (mm).
Multifeed detection limit #2 is invalid. Re-enter a value for "#2" that is
between 0 and 510 (mm).
Invalid front side horizontal offset has
been entered.
Re-enter a value for front side hor-
izontal offset that is between -4
and 4.
Invalid reverse side horizontal offset
has been entered.
Re-enter a value for reverse side
horizontal offset that is between -4
and 4.
Invalid front side vertical offset has
been entered.
Re-enter a value for front side ver-
tical offset that is between -4 and
4.
Invalid reverse side vertical offset has
been entered.
Re-enter a value for reverse side
vertical offset that is between -4
and 4.
Invalid length magnification adjust-
ment has been entered.
Re-enter a value for "Length Mag-
nification" that is between
-3.1 and 3.1 (%).
Front side horizontal offset has not
been set.
Set a front side horizontal offset.
Reverse side horizontal offset has not
been set.
Set a reverse side horizontal offset.
Front side vertical offset has not been
set.
Set a front side vertical offset.
Reverse side vertical offset has not
been set.
Set a reverse side vertical offset.
Length magnification adjustment has
not been set.
Set a length magnification adjust-
ment.
Date/Time Date/time setting is invalid. Re-enter the date/time using only
valid numbers.
Time adjustment has caused the ses-
sion to timeout. Logging out now.
No action required.
Screen Message Action
To Next Page
Loading...
