340
Standby Mode Auto logout time must be shorter than
that for standby mode.
Enter a shorter time for auto logout
("Logout after") than for standby
mode ("Standby after").
Admin Pass-
word
Current password has not been
entered.
Enter a current password.
Invalid current password has been
entered.
Check the status of the "Caps
Lock" and "Num Lock" indicators,
and re-enter the current password.
New password has not been entered. Enter a new password.
New password contains invalid char-
acters.
Enter a valid new password.
Alphanumeric characters (case
sensitive) and symbols may be
entered.
Confirm Password has not been
entered.
Enter the same password again in
the Confirmation Password field.
Password and Confirm Password do
not match.
Enter the same password string in
both the New and Confirm Pass-
word fields.
Passwords must contain at least 7
characters.
Re-enter a new or confirm pass-
word that contains at least 7 char-
acters.
IP Address IP Address has not been entered. Enter an IP address.
Subnet Mask has not been entered. Enter a subnet mask.
Default Gateway has not been entered. Enter a default gateway.
IP Address is incomplete. Complete the IP address.
Subnet Mask is incomplete. Complete the subnet mask.
Default Gateway is incomplete. Complete the default gateway.
IP address is invalid. Enter a valid IP address.
Subnet mask address is invalid. Enter a valid subnet mask address.
Default gateway address is invalid. Enter a valid default gateway
address.
Specified IP address is already being
used.
Enter a different IP address.
IP Address and Default Gateway must
be different.
Enter an IP address and default
gateway that are different.
Screen Message Action
To Next Page
Loading...
