Fujitsu FI-6000NS - Page 418

390
1204000D Specified password is no longer
valid for this network folder.
Try the following:
• Login with a different account.
• Contact a network administrator to have
the password validated again.
1204000E Specified user needs to renew
their password for this network
folder.
Try the following:
• Login with a different account.
• Contact a network administrator to have
the password changed.
12040100 Error: network folder access
was refused.
Try the following:
• Contact a network administrator to
check whether the network folder can
store data.
• For the MTIFF format, the file size for
the scanned data may not exceed 2GB.
Try adjusting the scan parameters to
decrease the size of the file.
12130001 Error: Scan&Buffer process
could not output data for the
scheduled jobs.
Try again.
13060001 Scanner initialization has
failed. Try turning the power
off and back on again. If prob-
lem persists, the administrator
should contact the FUJITSU
scanner dealer or an authorized
FUJITSU scanner service pro-
vider for help
If the scanner does not restart automati-
cally, disconnect the AC cable from the
scanner to turn the power off, wait for at
least ten seconds, then reconnect the AC
cable and try turning the power back on
again.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
1306001A
1306001D
1306002C Insufficient memory. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
System might be unstable.
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Code Message Action